Top 10 Best Whirlpool Refrigerator Water Filter

More often than not, the water used at home contains debris, impurities and minerals that are not visible to the naked eye. These contaminants may alter the taste, odor and color of the water. Some of these pollutants when ingested may cause harm to our bodies in the long run.

Due to the precedent, many people have adopted at least one among the various water cleansing mechanisms available ranging from Whole House Water Filtration systems, a Water Dispenser or a refrigerator water filter.

The latter has become increasingly common because a considerable number of individuals own a refrigerator. The precedence, therefore, is set by convenience, making it a quick or a readily available option. Whirlpool refrigerator water filter is among the commonly used brands among the Whirlpool range of refrigerators.

The filters, however, vary majorly in shape and sizes. It is because the fridges come in the different design framework. For instance, Whirlpool gold refrigerator water filter may differ from another Whirlpool fridge water filter.

It demonstrates that each refrigerator model requires a specific water filter that will fit in perfectly. To get the right water filter, you can either use the model number of the refrigerator or the model number of the current water filter in the fridge.

You can find the previous and many other guidelines noted among the Whirlpool refrigerator water filter replacement instruction manual. The Whirlpool refrigerator water filter replacement process varies depending on the location of the filter in the fridge and the technique used to remove or install a new one.

For instance, push-in filters have a push to eject button, or you can use a simple twist and pull or twist then push, to either remove or install. On the other hand, twist-in filters may come with a push to release mechanism or you can either remove or install by a full quarter turn twist. Lastly, inline filters require that one disconnects both ends when removing, or reconnects both ends when replacing a new one.

All inline filters remain attached at the back of the refrigerator. Twist and push-in filters are found either at the upper right interior or in the bottom grille. Below are the locations of water filters on various Whirlpool refrigerator designs.

Where Is The Water Filter Located In A Whirlpool Refrigerator?

Knowing the location of the water filter in your refrigerator is crucial, especially when it requires a replacement. Whirlpool refrigerator water filter positioning is almost similar in all models. However, consider the below as a guide.

  • French 3 door – You can find the filter cartridge on this model at the back, grille or the upper right corner inside the fridge.
  • Side by side – Refer to French 3 door above.
  • Under the counter – The water filter is at the grille of this particular design of the refrigerator.
  • French 4 door – The filter is either on the back or at the upper right interior.
  • Bottom freezer – Look for the water filter on the back, at the bottom left corner on the grille or at the top right corner inside the refrigerator.
  • Top freezer – Locate the filter cartridge mounted on the back or at the lower left on the grille. If not, then look inside the fridge at the upper right corner.

Top 10 Best Whirlpool Refrigerator Water Filter

There are many brands of refrigerator water filters in the market. They vary in compatibility and functionality. Below are the best Whirlpool refrigerator water filters that have met the minimum set of industry requirements.

1) EveryDrop by Whirlpool EDR1RXD1 Refrigerator Water Filter 1

This superior design carbon filter is NSF-approved to filter out contaminants such as lead, cysts, trace chemicals and several others. It also reduces the smell and taste of chlorine in the water. To keep your water clean and fresh, it is advisable to replace the filter every six months.

EveryDrop by Whirlpool Refrigerator Water Filter 1

Features

  • Replaces W10295370A model
  • 200 gallons’ dispensing capacity
  • Six months’ filter life
  • Made of carbon block
  • 30-120 standard operating pressure
  • 0.5 gallons per minute
  • 33-100 °F standard operating temperature
  • NSF 42 ,53, 401
  • Compatible with 106.50023211, 10650023211, ASD2575BRW01 refrigerator models
  • Endorsed by brands such as Amana, Jenn Air, Maytag, KitchenAid
  • Reduces 99 per cent of lead and 28 water pollutants
Reduced odor and taste of chlorine
Gives clear water with an excellent taste
Fits Whirlpool fridges perfectly
Simple, straightforward installation process
Long-lasting
Multiple approvals
Removes metals like lead and VOCs
pesticides, herbicides and chemicals
Compatible with a limited number of refrigerators
Costly

How To Replace?

  1. Find the water filter cover at the upper right interior of the fridge or in the bottom grille.
  2. Pull up the filter cover door and whisk out the old filter then dispose of it.
  3. Pull the filter out and discard it.
  4. Ready the new filter by removing the wrapping and securing the O-rings in place.
  5. Gently insert the new filter into the compartment with the arrow pointing upward. Twist to align the notches and the grooves.
  6. Close the filter door until it clicks in position.
  7. Run four gallons of water through the filter to release pressure.
  8. Hold the reset button for 3 seconds to reset the ‘change filter’ light.

2) EveryDrop by Whirlpool EDR2RXD1 Refrigerator Water Filter 2

This genuine water filter by Whirlpool turns your fridge into an oasis. It eliminates toxins, chemicals and waterborne parasites, which pose a high health risk. Everydrop water filter 2 leaves your water tastier without the smell or taste of chlorine. It has numerous endorsements and certifications by accredited bodies.

EveryDrop by Whirlpool Refrigerator Water Filter 2

Features

  • Six months’ filter life
  • 200 gallons
  • 0.75 gallons per minute
  • 30-120 standard operating pressure
  • 33- 100 °F standard operating temperature
  • NSF 42, 53, and 401 certified
  • Made of carbon block
  • Substitutes 1500 bottles of water
  • Guarantees 99 per cent lead reduction
  • Reduces 24 impurities
Compatible with a wide range of refrigerators
Reduces the cost of buying bottled water
Serves a long duration
Improves the quality of water
Guarantees high safety standards of water
Expensive

How To Replace?

  1. Locate the water filter compartment at the upper right corner inside the fridge and open its cover.
  2. Slightly remove the old filter, so it’s angled down, twist it to the left and pull it straight out. Dispose of it.
  3. Unwrap the new filter while making sure the O-rings are in place.
  4. Insert the new filter into the compartment while the arrow is pointing up.
  5. Push the new filter in while rotating it clockwise until it locks into position.
  6. Close the filter cover, so it clicks in place.
  7. Allow water to run for 3 minutes to release the trapped air within the filter cartridge.
  8. Reset the “change filter” indicator if your fridge has it.

3) EveryDrop by Whirlpool EDR3RXD1 Refrigerator Water Filter 3

What an excellent way to guarantee great taste and safe drinking water around you than with this Everydrop refrigerator water filter 3 by Whirlpool. With its superior filtration, it can reduce and remove several toxins from your water using an advanced carbon block sieve. It offers 6 months of protection or 200 gallons of fresh and clean tasting water.

Whirlpool EDR3RXD1 Everydrop Refrigerator Water Filter 3

Features

  • Made of carbon block
  • Six months’ filter life
  • 200 gallons’ capacity
  • 0.5 gallons per minute
  • 30-120 standard operating pressure
  • 33 – 100 °F standard operating temperature
  • NSF 42, 53, and 401
  • 99 percent lead reduction
  • Guarantees reduction of 71 contaminants
  • Endorsed by brands such as Amana, Jenn Air, Maytag, KitchenAid
Fits a long list of refrigerators
Long-lasting
An assurance for safe water for use
Saves money and time that could have been spend buying bottled water
Eliminates up to 90 percent of pollutants
Easy installation process
Fits perfectly in your fridge
Limited compatibility

How To Replace?

  1. Locate the filter at the bottom grille of the refrigerator on the left side.
  2. You will notice there is an eject button. Push it to release the old filter cartridge.
  3. Pull it out and dispose of it.
  4. Unwrap the new water filter and confirm that the O-rings are in place after the cover is removed.
  5. Place the cap on the new filter to enable the ridges to come into position. Twist the cap to the right to lock it.
  6. Insert the new filter into the compartment with the arrow pointing to the left.
  7. Push it straight in until the eject button pops back out.
  8. Run water through the new filter for 3 minutes to release the pressure.
  9. If your fridge has the “change filter” light, hold it for 3 seconds to reset.

4) EveryDrop by Whirlpool EDR4RXD1 Refrigerator Water Filter 4

The Whirlpool Everydrop water filter 4 is a sure way to eliminate industrial chemicals, lead asbestos and cysts among several other toxins present in the water. It also reduces the level of chlorine concertation in the water and retains an amount of fluoride that is beneficial to your health.

EveryDrop by Whirlpool Refrigerator Water Filter 4

Features

  • Lasts up to 6 months
  • 200 gallons dispensing capacity
  • 0.78 gallons per minute
  • 30 – 120 standard operating pressure
  • 33 – 100 °F standard operating temperature
  • Made of carbon block
  • NSF 42, 53
  • Updated version of 4396395, UKF8001 models
  • Accredited with reduction of 23 pollutants
  • Endorsed by brands such as Amana, Jenn Air, Maytag, KitchenAid
Reduces chlorine levels in the water
Perfect fit
Easy to install
Long-lasting
Provides clear and excellent tasting water
Eliminates impurities and waterborne parasites
Works on select refrigerators

How To Replace?

  1. Locate the filter compartment in the upper right corner inside the fridge.
  2. Push then pull down the cover in case the tab is facing outward. But if it appears at the bottom of the cover, hold the small lever and pull forward then down to open the lid to expose the old filter.
  3. Twist the old water filter to the left and pull it straight out. Dispose of it.
  4. For first-time filter replacement, you will come across a cap inside the filter compartment. Rotate it anticlockwise and pull it out straight on.
  5. Insert the new filter well aligned with the grooves, push it in then twist it to the right.
  6. Push until it locks in position.
  7. Close the filter box so that it clicks to confirm it is secured.
  8. Flush three gallons of water through the new filter to release the trapped air.
  9. Hold the “change filter” light for 3 seconds to reset.

5) EveryDrop by Whirlpool EDR5RXD1 Refrigerator Water Filter 5

Eliminate impurities before they can harm you with this Everydrop water filter 5 which can remove and reduce lead, chlorine, pesticides, cysts and several other waterborne microorganisms thereby guaranteeing you clean water and ice.

EveryDrop by Whirlpool EDR5RXD1 everydrop 5 Refrigerator Water Filter

Features

  • Lasting for six months
  • 240 gallons dispensing capacity
  • 0.5 gallons per minute
  • 33 – 100 °F standard operating temperature
  • 30 – 120 standard operating pressure
  • Contains carbon block
  • NSF 42, 53, 401
  • Contains Polypropolene
  • Guarantees reduction of 27 toxins
  • Updated version of 4396508, 4396510, 4396918, 8212491, 8212652 models
Long-lasting
Removes 90 percent of contaminants
Improves the taste of water
Reduces chlorine smell and taste
Perfect fit for Whirlpool refrigerators
Simple to install
Limited to a few refrigerator models
Expensive

How To Replace?

  1. The water filter is at the lower left on the bottom grille.
  2. Twist the cap anticlockwise until the handle is vertical, and pull the old filter out.
  3. Slide the re-usable cap off the end of the water filter to remove. Keep the cap, and dispose of the old filter.
  4. Unwrap the new filter cartridge and take off the protective coverings from the O-rings with care.
  5. Slip the re-usable water filter cap onto the end of the new filter cartridge.
  6. Gently insert the new filter into the grille compartment with the cap aligned in a vertical position and push it straight on until it stops.
  7. Twist the new filter cap clockwise until it is horizontally aligned.
  8. Run water through the new filter cartridge for 4 minutes to flush any air bubbles.
  9. Press and hold the “change filter” light for 3 seconds to reset in case the fridge has one.

6) EveryDrop by Whirlpool EDR6D1 Refrigerator Water Filter 6

Whirlpool EveryDrop Water Filter 6 employs carbon technology to remove or reduce pollutants from the water, thereby ensuring safety and high hygiene standards. It is NSF certified and has an endorsement by brands such as Amana, Jenn Air, Maytag, KitchenAid, as genuine and reliable.

EveryDrop by Whirlpool Refrigerator Water Filter

Features

  • Lasts up to 6 months
  • Can dispense up to 240 gallons
  • 33 – 100 °F standard operating temperature
  • 30 – 120 psi
  • NSF 42, 53
  • Made of carbon block
  • 0.5 gallons per minute
  • Replaced 4396701 model
  • Reduces 9 toxins
Tested and certified to guarantee high standards
Reduces the taste and odor of chlorine
Removes lead, industrial chemicals, mercury, pesticides
Fits perfectly
Quick to install
Cuts on a budget of buying water
Guarantees safe water for domestic use
Lacks NSF 401
Works on a few fridge models

How To Replace?

  1. The water filter is at the bottom left corner of the refrigerator.
  2. Rotate the cap at 90 degrees angle to the left until the handle is vertical, then pull the old filter straight out.
  3. Slide the re-usable cap off the end of the water filter to remove. Keep the cap, and dispose of the old filter.
  4. Unwrap the new filter cartridge and take off the coverings from the O-rings.
  5. Slide the re-usable water filter cap onto the new cartridge.
  6. Gently insert the new filter into the compartment with the cap aligned in a vertical position and push it straight on until it stops.
  7. Rotate the new filter cap at 90 degrees angle to the right until it is horizontally aligned.
  8. Run water through the new filter cartridge for up to 3 minutes to remove trapped air bubbles.
  9. Press and hold the “change filter” light for 3 seconds to reset in case the fridge has one.

7) EveryDrop by Whirlpool EDR7D1 Refrigerator Water Filte 7

Keep pesticides, lead, asbestos, chemicals and parasites at bay using the EveryDrop by Whirlpool EDR7D1 water filter cartridge that is NSF approved and certified.

EveryDrop by Whirlpool Refrigerator Water Filter

Features

  • Lasts up to 6 months
  • Can dispense up to 250 gallons
  • 33 – 100 °F standard operating temperature
  • 30 – 120 psi
  • NSF 42, 53
  • Made of carbon block
  • 0.5 gallons per minute
  • Replaced UKF7003 model
  • Reduces 7 pollutants
  • Perfect fit for JennAir, Maytag brands, Dacor
Easy installation
Carbon filtration
Long-lasting
Removes 90 percent of waterborne parasites and other pollutants
Reduces chlorine levels
Limited to select fridges

How To Replace EveryDrop by Whirlpool Refrigerator Water Filter 7

  1. Locate the water filter compartment in the upper right corner inside the refrigerator.
  2. Grasp the old filter, gently rotate it counterclockwise at 1/4 turn until it releases the old filter head.
  3. Dispose of the old cartridge and ready the new one.
  4. Insert the new filter into the compartment straight on until it stops.
  5. Rotate the new cartridge 1/4 turn clockwise until it is secure in position.
  6. Flush the filter using 4 gallons of water to release pressure and avoid popping.
  7. In case your model has a “change filter” indicator, then press and hold the reset water filter button on the dispenser for 3 seconds to reset.

8) Mist UKF8001 Replacement For Whirlpool Refrigerator Water Filter

This affordable carbon filter reduces the levels of chlorine among other toxins in the water, giving freshness and purity. As it removes the odor and sour taste in the water, it also filters out particles making the water clear and safe for consumption.

Mist UKF8001 Replacement For Whirlpool Refrigerator Water Filter

Features

  • Lasts up to 6 months
  • 200 gallons dispensing capacity
  • 0.78 gallons per minute
  • 30 – 120 standard operating pressure
  • 33 – 100 °F standard operating temperature
  • Activated carbon block
  • NSF 42
  • Replaces 4396395, UKF8001, 46-9005 models
  • Accredited with reduction of 23 pollutants
  • Endorsed by brands such as Amana, Jenn Air, Maytag, KitchenAid, Kenmore
Perfect fit for several brands
Simple to install
Reduces chlorine smell and taste
Gives clarity and good taste to the water
Affordable
Long-lasting
Compatible with a few select appliances

How To Replace?

  1. Locate the filter compartment in the upper right corner inside the fridge.
  2. Push then pull down the cover in case the tab is facing outward. But if it appears at the bottom of the cover, hold the small lever and pull forward then down to open the cover to expose the old filter.
  3. Twist the old water filter to the left and pull it straight out. Dispose of it.
  4. For first-time filter replacement, you will come across a cap inside the filter compartment. Rotate it anticlockwise and pull it out straight on.
  5. Insert the new filter well aligned with the grooves, push it in then twist it to the right.
  6. Push until it locks in position.
  7. Close the filter box so that it clicks to confirm it is secured.
  8. Flush three gallons of water through the new filter to release the trapped air.
  9. Hold the “change filter” light for 3 seconds to reset.

9) Odoga 4396508 Refrigerator Water Filter Compatible with Whirpool

Odoga, 4396508 Refrigerator Water Filter, reduces the level of chlorine in the water and other harmful toxins such as Mercury, Thallium, Cadmium and Lead that may be present in your water. It has numerous certifications among them is NSF.

Odoga 4396508 Refrigerator Water Filter Compatible with Whirpool

Features

  • Activated coconut carbon block
  • Removes 99 per cent of chlorine smell and taste
  • Mineral retention technology
  • Replaces 4396508, EDR5RXD1, 4396510, 4392857, WF-NLC240V, WF-L500, 4396918, W10186668, EveryDrop Filter 5, 46-9010 models
  • NSF 42, WQA, IAPMO approved
Guaranteed money back within 60 days of usage
Retains important minerals
Superior filtration with activated coconut carbon
Provides fresh and clean water with good taste
Easy, straightforward installation
Lasts up to 6 months or 200 gallons
Limited compatibility

How To Replace?

  1. The water filter cap is at the bottom left corner on the grille.
  2. Twist the cap to the left until the handle is vertical, and pull the old filter out.
  3. Slide the re-usable cap off the end of the water filter to remove. Keep the cap, and dispose of the old filter.
  4. Unwrap the new filter cartridge and take off the protective coverings from the O-rings with care.
  5. Slip the re-usable water filter cap onto the end of the new filter cartridge.
  6. Gently insert the new filter into the grille compartment with the cap aligned in a vertical position and push it straight on until it stops.
  7. Twist the new filter cap clockwise until it is horizontally aligned.
  8. Run water through the new filter cartridge for 4 minutes to flush any air bubbles.
  9. Press and hold the “change filter” light for 3 seconds to reset in case the fridge has one.

10) WaterSentinel WSW-2 Refrigerator Replacement Filter

Get fresh and clean, excellent tasting water with this WaterSentinel WSW-2 filter that reduces chlorine and rust tastes and odour in your water.

WaterSentinel WSW-2 Refrigerator Replacement Filter

Features

  • NSF 42 and WQA Gold seal
  • Coconut carbon shell
  • Lasts up to 6 months
  • Capable of dispensing 300 gallons
  • Removes sediments and rust
  • Reduces chlorine odour and smell
Affordable
Bigger dispensing capacity
Removes 99 per cent chlorine taste and smell
Eliminates fine silt or sand particles
Fast installation
Long-lasting
Excellent after-sales service
Compatible with a few models

How To Replace?

  1. Locate the filter at the bottom of the fridge.
  2. Gently twist the knob 1/4 turn to the left to release the cartridge.
  3. Pull out the old filter and remove the re-usable knob.
  4. Unwrap the new filter remove the protective cap.
  5. Put the re-usable knob from the old filter onto the new cartridge.
  6. Gently push in the new cartridge into the compartment until it reaches the end.
  7. Rotate the new filter 1/4 turn to the right until it locks in place.
  8. Flush the cartridge for three minutes using running water.

Frequently Asked Question (FAQ)

Bottom Line

Whirlpool refrigerator water filters guarantee safety and are a perfect fit for several compatible refrigerators. There are several factors to consider before replacing the refrigerator water filter.

Among the crucial elements are getting a perfect fit for your fridge and a guaranteed genuine part. There are several brands available in the market. Differentiating between counterfeits and original pieces may be challenging.

However, one should be able to look out for certifications and if possible conduct a search for the product on the sites of organizations that issue approvals such as the International Association of Plumbing and Mechanical Officials (IAPMO), the American National Standards Institute (ANSI), Water Quality Association (WQA) and NSF international. Counterfeit products pose a health risk by not meeting the required set standard.

The most common criteria are NSF 42 and 53. The former covers the safety of the material while ensuring no leaching or contamination can occur as a result of the contents that make up the water filter.

NSF 53 includes a clutter of toxins such as heavy metals and asbestos, among many more. Another necessary NSF certification to look out for is 401, which caters to trace pharmaceuticals and chemicals. Once you have acquired the right water filter, it is advisable to replace it after every six months or upon exhausting the set gallon capacity.